Eco-Etch Pro Concrete Etch and Clean Concentrate
is a water-based non-hazardous, non-corrosive, biodegradable
concentrate concrete etch and cleaning solution. It is the ideal acid
etch alternative. This advanced formula incorporates a custom blend of
surfactants, organic minerals and derivatives of a plant based extract
for the most effective concrete etching solution available. It does not
contain phosphoric, hydrochloric or muriatic acid, yet works better,
safer and faster. Eco-Etch Pro™ is
the preferred eco-friendly and user friendly acid etching alternative
for interior or exterior surface preparation applications. It will not
burn skin, corrode metals, or harm vegetation.
Clean and etch concrete, masonry, cinder block, brick, mortar joints and grout to properly prepare substrates for optimum penetration and adhesion of stains, paints, industrial coatings, and sealers. Eco-Etch Protm also removes dirt, clay, mortar deposits, rust and efflorescence. A one step concrete etch and clean solution that brings back a new look surface. Highly recommended for use with SoyCrete™ Concrete Stain and Eco-Tuff™ Coatings for optimum porosity and desirable results.
Eco-Etch Pro™ begins to work immediately upon contact without toxic hazards or dangerous skin burns associated with traditional acid formulas. Eco-Etch Pro™ should be used in full strength or diluted up to 3:1 (makes up to 4 gallons) with water for lighter cleaning and etching requirements. One gallon will cover up to 250 square feet. Dwell time will vary from 1 to 15 minutes which is also affected by the dilution ratio, porosity, and temperature. Rinsing thoroughly with water neutralizes the etching action.